New capacitive ACC level sensors

With the ACC116 series, Agromatic presents a further development of the point level sensor family for the detection of the fill level in silos, bunkers, flat storage facilities and similar applications.

With the ACC116 series, Agromatic presents a further development of its point level sensor family for level detection in silos, bunkers, flat storage areas, and similar applications. The sensors can be used for all organic and inorganic products with a residual moisture content of over 4%, or a DK value of min 2, or liquids. Due to their diverse application possibilities, the sensors can be installed in a container from the top, the side, or the bottom. With the advent of new measurement technologies, a completely new electronics system for point level measurement has been developed. The new sensors are available in all previous housing types. These consist of robust metal housings designed for harsh industrial environments. The sensors can be used as rod and rope probes, which are used as full detectors, or as plate probes for empty detection.

Together with the temperature measurement, the full detector can also be installed as a so-called combo rod probe in the floor box of the temperature measuring system. This has the significant advantage that only one installation is required for both applications.

Another innovation is the new ACC116 full detector series, which is also available with a concrete-enclosed floor box and cable extension. The major advantage of the floor box is that nothing protrudes from the silo floor, yet the electronics remain accessible from above. This eliminates tripping hazards and allows for very easy cleaning of the silo floor. The flexibility of the cable extension also ensures that silo cells with very high material input rates can be reliably monitored for fullness. The cable length is a maximum of 12 meters, but can easily be shortened on-site if necessary.

At the heart of the development is a highly sensitive sensor. Agromatic relies on a new, proprietary sensor using frequency sweep technology. This sensor allows for enormous sensitivity while simultaneously suppressing interference that often occurs in milling and warehouse environments. The electronics also compensate for temperature fluctuations and adhesions to the sensor rod or rope. The sensors are supplied as standard with a switchable 24VDC/230VAC power supply with a potential-free relay contact, but are also available in a 10-30VDC version for installation in ATEX Zone 20.

Easy to use

The sensor is very easily configured using three buttons, while the eight dual-color LEDs indicate the individual configuration levels of the sensor. In just a few steps, the sensor can be calibrated, set as a full or empty detector, adjusted to the sensitivity, or adjusted to the switching delay. The settings are always visible directly on the sensor via the LED display; no additional device is required for calibration. The LED display shows both the configured switching thresholds and the currently measured level. This allows the user to easily check the sensor's functionality.

Proven features

The new sensor generation is 100% compatible with Agromatic's previous capacitive sensors. Not only the mechanical features such as the process connection, but also the popular remote calibration function via the Ex power supply module have been retained. The new sensor modules can therefore also be used as spare parts for existing sensors. Furthermore, Agromatic's point level sensors operate with just one cable, meaning that full level detection is carried out via a sensor rod, cable, or plate. This allows the rod or cable to be easily shortened to the desired length on site, making it very easy to adjust a probe to the desired trigger height. Should this fail, i.e. the rod or cable is shortened too far, the rod or cable extension can be easily replaced on site. The maximum rod length is 4 m and that of the cable extension is 12 m.